Flowline Pull-in Tool System Pull-In Tool (PIT) An ROV controlled structural tooling package comprising two independent soft rope traction winches, docking probes and rope anchors, encompassing a pullhead docking and capture facility. Incorporated in the upper face of the tool is a guidance and docking facility with E/H control and communication connections for interfacing with the ROV via the Interface Skid. Size (mm) – 4100L x 2200W x 2000H

Interface Skid A structural tooling package secured to the base of a Workclass ROV supplying functional power and controls to the PIT via a connection stabplate, and to a Front Frame tooling package and Tool Deployment Unit. Size (mm) – 2830L x 1920W x 2000H Front Frame Assembly and Tool Deployment Unit - Clamp make-up tool - Low Torque Tool - Medium Torque Tool - Hot Stab Tool - Seal plate Change-Out Tool - HighTorqueTool Tool Deployment Basket A protection frame structure, designed to overcome the buoyancy of the PIT, for safe deployment / recovery from deck to seabed, using the vessel’s crane. On the seabed the PIT is removed from and replaced back into the basket by the ROV. PC based Control System A central control unit with page per tool display screen control including full diagnostic and maintenance pages. Located adjacent to the ROV pilot’s Control Console. Note: ROV, Interface Skid and Pull-in Tool are all neutrally buoyant Subsea.

Umbilical Fly to Place Tool System FTP Tool Interface Skid (Common with Pull-in tool) PC Based Control System Support ROV Tooling Deployed with ROV

<< Back to Components